目前化工液氨罐液位的測量主要是雷達液。
磁翻板式液位計,雙法蘭差壓式液位計和超聲液。
位計等。液氨具有易燃、易爆、有毒的特點。
因此,液氨儲罐液位測量?jì)x的選擇、安裝和安裝。
調試很重要。以下是三種液位計的選擇和應用。
進行比較分析。
液氨罐常用液位計的檢測原理。
1.1電纜導波雷達液位檢測。
就拿LevelflexFMP38來說,它是基于液位計的。
TOF(行程時間)原理的俯視測量系統。
測量從考點到液氨表面的距離。高頻脈沖信號。
發射到探針上,沿探針傳播。液氨表有脈沖信號。
表面反射,反射信號被儀器接收,并轉換成物位。
信息。這種測量方法是TDR法(時域反射法)。
測量參考點到液氨表面之間的距離(d)和脈沖信號的運送。
行時(t)成比例關系:D=c.t/2,其中c為光速。
如圖1所示。當空標高度(E)已知時,液位(L)的計算。
公式如下:L=E-D。
1.2磁性翻板液位檢測。
就拿UHZ側裝磁翻板來說,其設計依據是磁性。
原理和浮子法則。液位計通過法蘭與液氨罐相對。
連接,當被測容器中的液位上升和下降時,翻板式液位計。
雙色柱狀磁性浮子在磁場的影響下升降。
液位計面板雙色柱浮子的邊界是液氨罐。
實際液位
1.3差壓變送器液位檢測。
液氨流體靜力學原理檢查液氨罐的液位。
測量。如圖2所示。以固定高度H為例,例如。
水果表面高度不變,H。液體層壓也不變,當液體表面。
升高時,隨著h。液體層與液體表面之間的距離越來越大。
液體層壓也隨之增加。
當差壓計的一端連接液相,另一端連接氣相時,根據流量。
體靜力學原理包括:
p+=hpg+pr。
(1)(1)
P_=Px。
(2)(2)
公式:P+-變送器正壓室壓力;
H-H。液相取壓口與液面的垂直距離;